Makita DLS212Z 36V(18Vx2) Sans Fil Sans Balai Composé à coulisse de 12 pouces Onglet Scie (Outil Seulement)

Produit Description

Makita DLS212Z 36V(18Vx2) Sans Fil Sans Balai Composé à coulisse de 12 pouces Onglet Scie (Outil Seulement)

Make large clean cuts anywhere on the job site without extension cords with this 36-volt brushless 12-inch sliding compound miter saw with a 3-stage gear reduction system to increase cutting capacity when cutting molding. Built with 1-3/16-inch diameter rails with a forward front design allowing you to place the saw close to the wall of a workshop or job site to reduce footprint without sacrificing cutting capability. Equipped with a miter capacity of 60 degrees in both directions which is paired with a bevel capacity of 48 degrees in both directions.

CARACTÉRISTIQUES:

• Powerful 36-volt brushless motor provides 4,400 RPM to supply a high power-to-weight ratio ideal for prolonged and repetitive applications
• Angling capacity of 60 degrees miters and 48 degrees bevels in both left and right directions with positive stops increasing versatility
• Electric brake stops blade seconds after trigger is released for supreme productivity and increases your safety
• Doux Départ comportent augmente graduellement vitesse pour éliminer le démarrage choc tout en limitant le potentiel de Disjoncteurs à déclenchement
• Easy to use miter angle lock with releasing lever and locking lever while bevel angle lock located at the front for safety and convenience
• Handle Equipped with a 2-stage safety switch for your safety and an ergonomic horizontal soft rubber grip design limits vibration and comfortable use
• Built with a forward front design allowing you to place the saw close to the wall to reduce footprint without sacrificing capacity
• Guide fence and lower fence increase rigidity and support of materials while allowing them to be secured to holders to prevent damage
• Improved dust collection achieved with dual dust collection ports to ensure a clean work environment
• Internal 3-stage gear reduction system greatly increases capacity when cutting vertical baseboard or nested crown molding
• Automatic torque Drive Technology (ADT) feature adjusts the torque and speed according to the load condition, enabling rapid movement between high-speed and high-torque applications

SPÉCIFICATIONS:

• Puissance Source: 18V Max Batterie
• Accessoire Connecteur Type: 1 Pouce arbre
• Puissance :
  
  • tr/min: 4,400
• Onglet Portée :
  
  • Right/Left: 0 - 60 Degrees
• Biseau Portée :
  
  • Right/Left: 0 - 48 Degrees
• Coupant Capacité:
  
  • 0-degree Miter/Bevel: 4-1/4in X 14-1/4in
  • 45-degree Miter: 4-1/4in X 10in
  • 45-degree Bevel: 2-1/8in X 14-1/4in
• Poids: 67.7 lb

COMPREND:

• DLS212Z - 36V(18Vx2) Brushless 12in Slide Compound Miter Saw
• 12in 60-tooth Blade
• Poussière Sac
• Étau vertical
• Triangle Rule
• (2) Hex Wrench